Dell SE2422H - Display

46 | Operating the monitor
Icon Menu and
Submenus
Description
Display Use the Display menu to adjust image.
Dell 24 Monitor
Horizontal Position
Vertical Position
50
50
50
16 : 9
Aspect Ratio
Sharpness
Phase
Response Time
50
43
Normal
Pixel Clock
Reset Display
Display
Brightness/Contrast
Auto Adjust
Input Source
Color
Personalize
Menu
Others
Aspect Ratio Select the image ratio between 16:9, 4:3.
Horizontal
Position
(VGA input
only)
Use
or to adjust the image left or right.
Minimum is ‘0’ (-).
Maximum is ‘100’ (+).
Vertical
Position
(VGA input
only)
Use
or to adjust the image up or down.
Minimum is ‘0’ (-).
Maximum is ‘100’ (+).
Sharpness Makes the image look sharper or softer.
Use
or to adjust the sharpness from ‘0’ to ‘100’.
Pixel Clock
(VGA input
only)
The Phase and Pixel Clock adjustments allow you to adjust
your monitor to your preference.
Use the
or buttons to adjust for best imagequality.
Phase
(VGA input
only)
If satisfactory results are not obtained using the Phase
adjustment, use the Pixel Clock (coarse) adjustment and
then use Phase (fine) again.
Response
Time
Allows you to set the Response Time to Normal, Fast or
Extreme.
Reset Display Restores the display settings to factory defaults.