23" LCD Color Monitor Dell SP2309Wc
14
Zoom
Allows you to zoom in to specific area of interest on your monitor.
Use
and buttons to adjust the zoom from '0' to '100'.
NOTE: Zoom will reset to default after power cycling or after power save recovery.
NOTE: Zoom default setting will be zero when using PC format (RGB color space)
and 10 when using the video format from DVD players (YPbPr color space).
Phase
If satisfactory results are not obtained using the phase adjustmenu, use the
Pixel Clock (coarse) adjustmenu and then use Phase (fine).
NOTE: Pixel Clock and Phade Adjustments are only available for "VGA" input.
Sharpness
Allows you to increase or decrease the sharpness of the image.
Use
and buttons to adjust the sharpness from '0' to '100'.
Dynamic
Contrast
The dynamic contrast helps get a higher contrast if you choose Game preset,
Movie Preset, Sports Preset and Nature Preset.
Use the
button to enable the Dynamic Contrast adjustment.
Use the
button to disable the Dynamic Contrast adjustment.
NOTE: Brightness control is disabled in Dynamic Contrast mode.
Response
Time
Response time is the time required for an LCD pixel to change from fully
active (black) to fully inactive (white), then back to fully active again.
You can set the response time to:
• Normal
• Overdrive (default).
Display Reset
Resets the monitor's display settings to the factory defaults.
AUDIO
SETTINGS
Use the Audio Settings to adjust the audio settings.
To Next Page
Loading...
Need help?
General
