Weight
Weight with packaging 5.86 kg (12.92 lb) 7.1 kg (15.64 lb) 6.78 kg (14.95 lb)
Weight with stand assembly and
cables
4.89 kg (10.78 lb) 5.84 kg (12.86 lb) 5.54 kg (12.22 lb)
Weight without stand assembly
(for wall mount or VESA mount
considerations - no cables)
3.93 kg (8.66 lb) 4.83 kg (10.63 lb) 4.58 kg (10.1 lb)
Weight of stand assembly 0.70 kg (1.54 lb) 0.70 kg (1.54 lb) 0.70 kg (1.54 lb)
Environmental
Model ST2210 ST2310 ST2410
Temperature
Operating 0° to 40° C (32° to 104°F) 0° to 40° C (32° to 104°F) 0° to 40° C (32° to 104°F)
Non-operating
Storage: -20° to 60° C (-4° to 140° F)
Shipping: -20° to 60° C (-4° to 140° F)
Storage: -20° to 60° C (-4° to 140° F)
Shipping: -20° to 60° C (-4° to 140° F)
Storage: -20° to 60° C (-4° to 140° F)
Shipping: -20° to 60° C (-4° to 140° F)
Humidity
Operating 10% to 80% (non-condensing) 10% to 80% (non-condensing) 10% to 80% (non-condensing)
Non-operating
Storage: 5% to 90% (non-condensing)
Shipping: 5% to 90% (non-condensing)
Storage: 5% to 90% (non-condensing)
Shipping: 5% to 90% (non-condensing)
Storage: 5% to 90% (non-condensing)
Shipping: 5% to 90% (non-condensing)
Altitude
Operating 4,485 m (14,700 ft) max 4,485 m (14,700 ft) max 4,485 m (14,700 ft) max
Non-operating 12,191 m (40,000 ft) max 12,191 m (40,000 ft) max 12,191 m (40,000 ft) max
Thermal dissipation
95.56 BTU/hour (maximum)
64.85 BTU/hour (typical)
102.36 BTU/hour (maximum)
76.77 BTU/hour (typical)
102.39 BTU/hour (maximum)
78.48 BTU/hour (typical)
Plug and Play Capability
You can install the monitor in any Plug and Play-compatible system. The monitor automatically provides the computer system with its Extended Display Identification Data (EDID) using Display Data Channel (DDC) protocols
so that the system can configure itself and optimize the monitor settings. If required, the user can select different settings, but in most cases monitor installation is automatic.
LCD Monitor Quality & Pixel Policy
During the LCD Monitor manufacturing process, it is not uncommon for one or more pixels to become fixed in an unchanging state. The visible result is a fixed pixel that appears as an extremely tiny dark or bright discolored
spot. When the pixel remains permanently lit, it is known as a "bright dot." When the pixel remains black, it is known as a "dark dot."
In almost every case, these fixed pixels are hard to see and do not detract from display quality or usability. A display with 1 to 5 fixed pixels is considered normal and within competitive standards. For more information, see
Dell Support site at: support.dell.com.
Page 12 of 13
1/17/2012http://support.dell.com/support/edocs/MONITORS/ST2x10/en/ug/about.htm
To Next Page
Loading...
Need help?
General
