Dell U2722D - Input Source Selection

62 | Operating the Monitor
Icon Menu and
Submenus
Description
Input Source Selects between different video inputs that are connected
to your monitor.
Exit
Input Source
UltraSharp 27 Monitor
Display
DP
HDMI
Auto Select On
Auto Select for USB-C Prompt for Multiple Inputs
Reset Input Source
Rename Inputs
USB-C 90W
USB-C 90W
Color
Brightness/Contrast
PIP/PBP
Personalize
Others
Menu
USB
USB-C 90W
(U2722DE only)
Select USB-C 90W input when you are using the
USB-C 90W connector. Press the Joystick button to
confirm the selection.
DP Select DP input when you are using the DP (DisplayPort)
connector. Press the Joystick button to confirm the
selection.
HDMI Select the HDMI input when you are using the HDMI
connector. Press the Joystick button to confirm the
selection.
Auto Select Allows you to scan for available input sources.
Press to select this function.
Auto Select for
USB-C
(U2722DE only)
Press to select these functions:
• Prompt for Multiple Inputs: always show Switch to
USB-C Video Input message for user to choose whether
to switch or not.
• Yes: The monitor always switch to USB-C video without
asking while USB-C connected.
• No: The monitor will NOT auto switch to USB-C video
from another available input.
Rename Inputs Allows you to Rename Inputs.
Reset Input
Source
Resets all settings under the Input Source menu to the
factory defaults. Press to select this function.