Dell U2722D - Bottom View

12 | About Your Monitor
Bottom View
U2722D/U2722DX
9
1 3 4 52 116 7 8 9 10
12
Label Description Use
1 Security lock slot Secures monitor with security cable lock (sold separately).
2
Power connector
Connect the power cable.
3
HDMI port
Connect your computer with the HDMI cable.
4
DisplayPort in
Connect your computer with the DisplayPort cable.
5
DP port (out)
DP output for MST (Multi-Stream Transport) capable
monitor. To enable MST, refer to instruction on section
“Connecting the Monitor for DP MST Function”.
NOTE: Remove the rubber plug when using DP out
connector.
6
USB-C
upstream Port
Connect to your computer using the USB cable (A to C or
C to C). Once the USB cable is connected, you can use
the USB downstream connectors on the monitor.
7,9,10
Super speed USB
10Gbps (USB 3.2
Gen2) (3)
Connect your USB device. You can use these ports only
after you have connected the USB cable (A to C or C to C)
from the computer to the monitor.
Port with battery icon supports Battery Charging Rev.
1.2.