Dell U2722D - Page 82

82 | Operating the Monitor
If either DP, HDMI or USB-C input is selected and the corresponding cable is not
connected, a floating dialog box as shown below appears.
No DP Cable
The display will go into Standby Mode in 4 minutes.
www.dell.com/U2722D/DX/DE
or
No HDMI Cable
The display will go into Standby Mode in 4 minutes.
www.dell.com/U2722D/DX/DE
or
(U2722DE Only)
No USB-C Cable
The display will go into Standby Mode in 4 minutes.
www.dell.com/U2722D/DX/DE
See Troubleshooting for more information.