92 │ Tro ub lesho otin g
Wrong color Picture color not
good
• Change the settings of the Preset
Modes in the Color menu OSD
depending on the application.
• Adjust the Gain/Offset/Hue/
Saturation values under Custom
Color in Color menu OSD.
• Change the Input Color Format to
RGB or YCbCr/YPbPr in the Color
settings OSD.
• Run the built-in diagnostics.
Image retention
from a static
image left on the
monitor for a long
period of time
Faint shadow
from the static
image displayed
appears on the
screen
• Set the screen to turn off after a few
minutes of screen idle time. These can
be adjusted in Windows Power
Options or Mac Energy Saver setting.
• Alternatively, use a dynamically
changing screensaver.
Picture quality
(Refresh rate of
native resolution
changes from
60
Hz to 30 Hz;
or color depth
drops to 18 bits)
Issues of incorrect
refresh rate or
missing colors
Set USB-C Prioritization to High
Resolution.
To Next Page
Loading...
