Table 8. System setup options—Storage menu
Storage
Enable SMART Reporting Enables or disables the S.M.A.R.T(Self-Monitoring, Analysis, and Reporting
Technology) option on the system.
Default: OFF.
Drive Information
M.2 PCIe SSD-1 Provides information about the type and device on the computer.
Table 9. System setup options—Display menu
Storage
Display Brightness
Brightness on battery power Sets the screen brightness when the computer is running on battery power.
Brightness on AC power Sets the screen brightness when the computer is running on AC power.
EcoPower Enables or disables EcoPower which increases the battery life by reducing the
screen brightness when appropriate.
Default: ON.
Full-Screen Logo Displays full screen logo if the image matches screen resolution.
Default: OFF.
Table 10. System setup options—Connection menu
Connection
Network Controller Configuration
Integrated NIC Allows pre-OS and early OS networking features to use any enabled NICs.
Enabled with PXE: Default
Wireless Device Enable Enable or disable internal WLAN/Bluetooth devices.
WLAN
Default: ON.
Bluetooth
Default: ON.
Enable UEFI Network Stack Allows pre-OS and early OS networking features to use any enabled NICs. This
may be used without the PXE turned on.
Default: ON.
HTTP(s) Boot Feature
HTTP(s) Boot This platform has HTTP(s) Boot capabilities.
Default: ON.
NOTE: Provisioning of the Certificate is necessary to connect to HTTPs
Boot server.
Table 11. System setup options—Power Management menu
Power Management
Battery Configuration Enables the computer to run on battery during peak power usage hours. Use
the below options to prevent AC power usage between certain times of each
day.
Default: Adaptive. Battery settings are adaptively optimized based on your
typical battery usage pattern.
66 System setup
To Next Page
Loading...
