Next steps
1. Install the display assembly.
2. Install the touchpad.
3. Install the speakers.
4. Install the power-adapter port.
5. Install the power-button with optional fingerprint reader.
6. Install the system board.
NOTE: The system board can be installed along with the heat sink.
7. Install the I/O board.
8. Install the fan.
9. Install the coin-cell battery.
10. Install the wireless card.
11. Install the M.2 2280 solid-state drive or M.2 2230 solid-state drive in M.2 slot one, whichever applicable.
12. Install the M.2 2230 solid-state drive in M.2 slot two, if applicable.
13. Install the memory module.
14. Install the 3-cell battery or 4-cell battery, whichever applicable.
15. Install the base cover.
16. Follow the procedure in After working inside your computer.
64 Removing and installing components
To Next Page
Loading...
