174 Adding and Replacing Parts
NOTE: If the memory module is not installed properly, the computer may not boot.
No error message indicates this failure.
3
Tilt the module cover towards the front of the system. (Lift the memory
module cover but do not remove it.
4
Carefully lower the memory module cover and allow it to snap into place.
5
Replace the keyboard and hinge cover. See "Replacing the Keyboard" on
page 171 and "Replacing the Hinge Cover" on page 170.
6
Insert the battery into the battery bay, or connect the AC adapter to your
computer and an electrical outlet.
7
Turn on the computer.
As the computer boots, it detects the additional memory and automatically
updates the system configuration information.
Confirm the amount of memory installed in the computer:
• Windows
®
XP
– Right-click the My Computer icon on your desktop, then click
Properties
→
General
.
•
Windows Vista
™
– Click the Windows Vista Start button , right-click
Computer
, and
then click
Properties
.
1 tab 2 notch
book.book Page 174 Tuesday, September 8, 2009 2:01 PM
To Next Page
Loading...
