Adding and Replacing Parts 177
NOTICE: If the memory module cover is difficult to close, remove the module and
reinstall it. Forcing the cover to close may damage your computer.
3
Replace the memory module cover.
4
Insert the battery into the battery bay, or connect the AC adapter to your
computer and an electrical outlet.
5
Turn on the computer.
As the computer boots, it detects the additional memory and automatically
updates the system configuration information.
Confirm the amount of memory installed in the computer:
• Windows
®
XP
– Right-click the My Computer icon on your desktop, then click
Properties
→
General
.
•
Windows Vista
™
– Click the Windows Vista Start button , right-click
Computer
, and
then click
Properties
.
1 tab 2 notch
book.book Page 177 Tuesday, September 8, 2009 2:01 PM
To Next Page
Loading...
