Dell Vostro 1520 - Display Assembly Hinges; Procedure for Removing Display Hinges

Back to Contents Page
Display Assembly Hinges
Dell™Vostro™1520ServiceManual
Removing the Display Assembly Hinges
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the display assembly from the computer.
3. Remove the display bezel from the display assembly.
4. Remove the display inverter from the display assembly.
5. Remove the LCD display panel from the display assembly.
6. Remove the eight screws securing the hinges to the display panel assembly.
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.