Dell Vostro 1520 - Display Assembly; Procedure for Removing the Display Assembly

Back to Contents Page
Display Assembly
Dell™Vostro™1520ServiceManual
Removing the Display Assembly
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the battery from the computer.
3. Remove the hard drive and mini-card access panel from the computer.
4. Remove the hinge cover from the computer.
5. Remove the keyboard from the computer.
6. Remove the hard drive from the computer.
7. Remove the optical drive from the computer.
8. Disconnect the antenna cables from the WLAN card.
9. Disconnect the camera cable from the system board.
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.