Dell Vostro 1520 - Hinge Cover; Procedure for Removing the Hinge Cover

Back to Contents Page
Hinge Cover
Dell™Vostro™1520ServiceManual
Removing the Hinge Cover
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the battery from the computer.
3. Use a plastic scribe gently to pry the back side of the hinge cover away from the base of the computer.
4. Starting on the right side, separate the hinge cover from the base of the computer.
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.