Back to Contents Page
Display Assembly
Dell™Vostro™1720ServiceManual
Removing the Display Assembly
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the battery from the computer.
3. Remove the hinge cover from the computer.
4. Remove the keyboard from the computer.
5. Disconnect the antenna cables from the WLAN card.
6. Remove the three screws that secure the display assembly to the computer chassis.
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
To Next Page
Loading...
