Dell Vostro 20-3052 User Manual

Installing the System Board
1. Align the system board on the computer.
2. Tighten the screws to secure the system board to the computer.
3. Connect the following cables to the system board:
a. camera cable
b. display assembly cable
c. system fan cable
d. hard-drive cable
e. hard-drive/optical-drive power cable
f. power-switch cable
g. speaker cable
h. convertor cable
4. Install:
a. memory (optional)
b. WLAN card
c. heatsink
d. system-board shield
e. back cover
f. optical-disk drive
g. stand
5. Follow the procedures in After Working Inside Your Computer.
Removing the Display Assembly
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove:
a. stand
b. optical-disk drive
22

Dell Vostro 20-3052 Specifications

General

Graphics	Intel HD Graphics
Optical Drive	Tray load DVD Drive (Reads and Writes to DVD/CD)
Processor	Intel Celeron Processor
RAM	4GB DDR3L 1600MHz
Storage	500GB
Display	19.5-inch (1600 x 900)
Operating System	Windows 10 Home
Audio	Integrated
Networking	10/100/1000 Ethernet
Ports	2 x USB 2.0, HDMI, RJ-45
Power Supply	65W
Wireless	802.11 Wi-Fi, Bluetooth 4.0