10. Lift the power supply out of the computer.
Installing The Power Supply
1. Place the power supply into the computer.
2. Slide the power supply towards the back of the computer till it snaps into place.
3. Replace the screws to secure the power supply to the computer.
4. Thread the power cables through the metal clips.
5. Connect the power cables to the system board.
6. Replace the
hard drive
.
7. Replace the
optical drive
.
8. Replace the
front panel
.
9. Replace the
cover
.
10. Follow the procedures in
After Working Inside Your Computer
.
29
To Next Page
Loading...
