CPU Configuration
Wake on Lan from S4/S5 Allows the computer to be
remotely turned on.
Default: Enabled
Auto Power On Enable or disable the
computer to power on
automatically. You can
further specify the date and
time the computer power
on.
Default: Disabled
Post Behaviour
NumLock Key Enable or disable the
NumLock State light during
POST.
Default: On
Keyboard Error Report Enable or disable the
Keyboard Error Report to be
displayed during POST.
Default: Enabled
Boot
Set Boot Priority
Specifies the order of different devices in
which the computer will boot through at
start up.
Hard Disk Drives Specify which hard drive the computer
can boot through.
CD/DVD ROM Drives Specify which CD/DVD the computer can
boot through.
Security
Unlock Setup Status
Specifies whether the BIOS can be edited.
Admin Password Status Specifies whether an administrator
password has been assigned.
System Password Status Specifies whether a system password has
been assigned.
Admin Password Allows you to change or delete the
administrator password.
69
To Next Page
Loading...
