4. Remove the screws that secure the system-board shield to the computer. Lift and remove the
system-board shield from the computer.
Installing the System-Board Shield
1. Align the system-board shield on the system board. Tighten the screws to secure it to the computer.
2. Install:
a. back cover
b. stand
3. Follow the procedures in After Working Inside Your Computer.
Removing the Coin-Cell Battery
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the:
a. stand
b. back cover
c. system-board shield
3. Press the release latch away from the battery; the battery pops out from the socket.
18
To Next Page
Loading...
