Dell Vostro 3015 - Boot Setup Options; Boot Sequence Settings

Onboard LAN Controller Enable or disable the onboard
LAN controller
Default: Enabled
Onboard LAN Boot ROM Enable or disable the onboard
LAN boot ROM
Default: Disabled
AC Power Adapter
Detection
Enable or disable the AC power
adapter detection
Default: Enabled
Boot
The Boot tab allows you to change the boot sequence.
Numlock Key Allows you to select
Numlock power-on
state
Default: On
Keyboard Errors Allows you to choose
whether the keyboard-
related errors are
reported during boot
process
Default: Report
USB Boot Support Enable or disable
booting from USB
devices
Default: Enabled
Boot Meu Security Enable or disable the
boot menu security
Default: Disabled
Load Legacy OPROM This option control
whether CSM should be
loaded during POST.
Default: Disabled
Boot Mode Allows you to select the
boot mode
Default: UEFI
1st Boot Device Allows you to select the
1st boot device
preference
Default: Internal HDD
Devices
2nd Boot Device Allows you to select the
2nd boot device
preference
Default: USB Storage
Devices
3rd Boot Device Allows you to select the
3rd boot device
preference
Default: Internal ODD
Devices
4th Boot Device Allows you to select the
4th boot device
preference
Default: USB Floppy
Devices
35