Dell VxRail S670 - Page 31

Configuration Expansion
card risers
PCIe Slots Controlling
processor
height Length Slot width
Config5. with 2x
FH and 2x LP
R2A 3 and 6 Processor 1 and
2
Low profile Half length x16 + x16
R4B 7 and 8 Processor 2 Full height Half length x8 + x8
Config9. with 1x
LP
R2A 3 Processor 1 Low profile Half length x16
The following table describes the slot priority information of VxRail S670 that supports the riser configuration 5 (R2A + R4B):
Card type Slot priority Form factor
HWRAID BOSS S2 Integrated slot N/A
HBA355i front 3 Low profile
Network Daughter Card (OCP) Integrated slot N/A
PCIe NIC 25GbE 6 Low profile
8,7 Full height
PCIe NIC 10GbE 6 Low profile
7,8 Full height
PCIe FC HBA 6 Low profile
7,8 Full height
The following table describes the slot priority information of VxRail S670 that supports the riser configuration 9 (R2A):
Card type
Slot priority Form factor
HWRAID BOSS S2 Integrated slot N/A
HBA355i front 3 Low profile
Network Daughter Card (OCP) Integrated slot N/A
Riser 1A
1. Slot 2
Riser 1B
1. Slot 2
2. Slot 1
Replacement of hardware components
31