Need help?Do you have a question about the Dell EMC XC640 Series and is the answer not in the manual?
General| Brand | Dell |
|---|---|
| Model | EMC XC640 Series |
| Category | Network Hardware |
| Language | English |
Provides step-by-step instructions for setting up the system.
Explains the purpose and configuration of iDRAC for system management.
Details methods for configuring the iDRAC IP address.
Describes how to log in to the iDRAC interface using different user types.
Lists methods for obtaining system firmware and drivers.
Provides steps to download drivers and firmware from the Dell support site.
Lists the tools available for managing the system before OS boot.
Explains how to access and use the System Setup utility for BIOS and device configuration.
Details the options within the System Setup Main Menu.
Describes how to access and configure system BIOS settings.
Provides steps to enter the System BIOS screen.
Details various settings within the System BIOS.
Explains how to view system properties like Service Tag and BIOS version.
Provides steps to access the System Information screen.
Details the information displayed in the System Information screen.
Explains how to view and configure memory settings.
Provides steps to access the Memory Settings screen.
Details various memory configuration options.
Details settings related to Persistent Memory modules.
Explains how to view and configure processor settings.
Provides steps to access the Processor Settings screen.
Details various processor configuration options.
Explains how to view and configure SATA settings.
Provides steps to access the SATA Settings screen.
Details various SATA configuration options.
Explains how to set the system boot mode and order.
Provides steps to access the Boot Settings screen.
Explains the available system boot modes (BIOS/UEFI).
Provides instructions on how to change the system's boot device order.
Describes network settings available in UEFI mode.
Provides steps to access Network Settings.
Explains how to configure system performance settings and power management.
Provides steps to access System Profile Settings.
Details various system profile configuration options.
Explains how to set system passwords and disable the power button.
Provides steps to access System Security settings.
Details various system security configuration options.
Provides steps to create system and setup passwords.
Explains how to use system passwords for security.
Provides steps to delete or change existing passwords.
Describes the utility for configuring iDRAC parameters.
Provides crucial safety guidelines for component handling.
Provides guidelines for system memory installation.
Offers general guidelines for configuring system memory.
Provides guidelines for optimal system memory performance and configuration.
Introduces processors and heat sinks and their function.
Provides steps to remove a processor and heat sink module.
Provides steps to remove a processor from its heat sink module.
Provides steps to install a processor into its heat sink module.
Provides steps to install a processor and heat sink module.
Introduces hard drives and their installation.
Introduces the power supply units (PSUs) and their support.
Provides steps to remove a power supply unit.
Provides steps to install a power supply unit.
Introduces the system board (motherboard).
Provides steps to remove the system board.
Provides steps to install the system board.
Introduces the Dell Embedded System Diagnostics tool.
Provides steps to run diagnostics from Boot Manager.
Provides steps to run diagnostics from the Lifecycle Controller.
Explains how to disable forgotten passwords using a jumper.
Introduces the BOSS card and its purpose.
Provides steps to remove the BOSS card.
Provides steps to install the BOSS card.
Provides troubleshooting steps for BOSS card issues.
Troubleshoots issues where physical disks are not visible to the OS.
Troubleshoots issues where virtual disks are not visible to the OS.
Troubleshoots issues where the BOSS card is not detected by the system.
To Next Page