Back view of the system
The back view displays the features available on the back of the system.
Figure 7. Back view of system with 3 PCIe expansion slots
Table 8. 3 PCIe expansion slot
Item Ports, panels, or slots Icon Description
1 PCIe expansion card
slot(s)
N/A
The expansion slot(s) enable you to connect PCI Express
expansion cards. For more information on the expansion cards
that are supported on your system, see Expansion card installation
guidelines on page 79.
2 Power supply unit (2) N/A For more information about the PSU configurations, see Technical
specifications on page 19.
3 NIC port (4) The NIC ports that are integrated on the network daughter card
(NDC) provide network connectivity. For more information about
the supported configurations, see Technical specifications on page
19.
4 USB 3.0 port The USB ports are 9-pin and 3.0-compliant. These ports enable you
to connect USB devices to the system.
5 Video connector Enables you to connect a display device to the system. For more
information, see Technical specifications on page 19.
6 Serial port Enables you to connect a serial device to the system. For more
information, see Technical specifications on page 19.
7 iDRAC9 port Enables you to remotely access iDRAC. For more information, see
the iDRAC User’s Guide at Dell.com/idracmanuals.
8 CMA power port N/A The Cable Management Arm (CMA) power port enables you to
connect to the CMA.
9 System identification
button
The System Identification (ID) button is available on the front and
back of the systems. Press the button to identify a system in a rack
by turning on the system ID button. You can also use the system ID
button to reset iDRAC and to access BIOS using the step through
mode.
12 XC640 Series and XC Core system overview
To Next Page
Loading...
