Dell EMC XC640 Series - Chapter 1: XC640 Series and XC Core System Overview; Front View of the System

XC640 Series and XC Core system overview
NOTE: The information in this document applies to both Dell EMC XC640 Series Appliances, and Dell EMC XC Core System
offering. Sections or information that apply to only one of the offerings (XC Series or XC Core) will be called out explicitly.
The XC640 Series system is a 1U rack server that supports up to:
● Two Intel Xeon Processor Scalable Family processors
● 10 x 2.5 inch hard drives on the front panel or 4 x 3.5 inch hard drives on the front panel
● 24 DIMM slots
● Two AC or DC redundant power supply units
Topics:
• Front view of the system
• Back view of the system
Front view of the system
The front view displays the features available on the front of the system.
Figure 1. Front view of 10 x 2.5 inch hard drive system
Figure 2. Front view of 4 x 3.5 inch drive system
Table 1. Features available on the front of the system
Item Ports, panels, and
slots
Icon Description
1 Left control panel N/A
Contains the system health and system ID, status LED, and the
iDRAC Quick Sync 2 (wireless) indicator.
NOTE: The iDRAC Quick Sync 2 indicator is available only
on certain configurations.
● Status LED: Enables you to identify any failed hardware
components. There are up to five status LEDs and an overall
system health LED (Chassis health and system ID) bar. For
more information, see Status LED indicators on page 9.
1
XC640 Series and XC Core system overview 7