Next steps
Install the IDSDM/vFlash card.
Installing the IDSDM/vFlash card
Prerequisites
Follow the safety guidelines listed in Safety instructions on page 55.
Steps
1. Locate the IDSDM/vFlash connector on the system board.
To locate IDSDM/vFlash, see System board jumpers and connectors on page 123.
2. Align IDSDM/vFlash card with the connector on the system board.
3. Push IDSDM/vFlash card until it is firmly seated on the system board.
Figure 46. Installing IDSDM/vFlash card
Next steps
1. Install the micro SD card.
NOTE:
Re-install the micro SD cards into the same slots based on the labels you had marked on the cards during
removal.
2. Follow the procedure listed in After working inside your system on page 56.
Network daughter card
The network daughter card (NDC) is a small, removable mezzanine card, which provides the flexibility of selecting different
network connectivity options.
88
Installing and removing system components
To Next Page
Loading...
