● With LCD panel
● Without LCD panel
For bezels with LCD panel, the system status can be viewed on the LCD panel. For more information, see LCD panel on page 15.
The LCD bezel is hot pluggable and can be used in any XC Series Appliance and XC Core System of the same branding even if
that system was originally not ordered with that LCD bezel.
Removing the optional front bezel
The procedure to remove the optional front bezel with the LCD panel and the front bezel without the LCD panel is the same.
Prerequisites
Follow the safety guidelines listed in Safety instructions on page 55.
Steps
1. Unlock the bezel by using the bezel key.
2. Press the release button, and pull the left end of the bezel.
3. Unhook the right end, and remove the bezel.
Figure 14. Removing the optional front bezel with the LCD panel
Installing the optional front bezel
The procedure to install the optional front bezel with the LCD panel and the front bezel without the LCD panel is the same.
Prerequisites
Follow the safety guidelines listed in Safety instructions on page 55.
Steps
1. Locate and remove the bezel key.
NOTE: The bezel key is part of the LCD bezel package.
2. Align and insert the right end of the bezel onto the system.
3. Press the release button and fit the left end of the bezel onto the system.
4. Lock the bezel by using the key.
Installing and removing system components
57
To Next Page
Loading...
