Steps
1. Align the tabs on the stand with the slots on the back cover.
2. Snap the stand until it clicks into place.
Next steps
1. Follow the procedure in After working inside your computer.
Removing the articulating stand
Prerequisites
1. Follow the procedure in Before working inside your computer.
CAUTION:
When servicing the system, place it on an elevated, clean, and flat surface. Dell recommends
removing the stand to avoid accidental damage to the system display during servicing.
About this task
The following image indicates the articulating stand and provides a visual representation of the removal procedure.
14
Removing and installing components
To Next Page
Loading...
