What to do if flash corruption detected by SBIOS on Dell Desktop?
You can try a few things: 1. Press the power button for over 25 seconds to do an RTC reset. 2. Disconnect all power sources (AC, battery, coin cell) and drain flea power by pressing and holding down the power button for 3~5 seconds. If the problem persists, replace the system board.
What to do if my Dell Desktop has a processor failure?
To address a processor failure on your Dell Desktop, run the Intel CPU diagnostics tools. If the issue continues, consider replacing the system board.
How to fix BIOS failure on Dell W26C Desktop?
If your Dell Desktop experiences a BIOS or ROM failure, flash the latest BIOS version. If the problem continues, the system board may need to be replaced.
What to do if my Dell W26C has a display failure?
To resolve a display failure on your Dell Desktop, flash the latest BIOS version. If the problem persists, consider replacing the LCD module.
How to resolve LCD failure (SBIOS message) on Dell W26C Desktop?
Replace the LCD module.
What to do if TPM detection failure on Dell W26C Desktop?
Replace the system board.
What to do if EC unable to program i-Fuse on Dell W26C Desktop?
To resolve the issue where the EC is unable to program i-Fuse on your Dell Desktop, replace the system board.
How to fix ungraceful EC code flow errors on Dell Desktop?
To resolve a generic catch-all for ungraceful EC code flow errors on your Dell Desktop, disconnect all power sources (AC, battery, coin-cell) and press and hold the power button to drain flea power.
How to fix Power-rail failure on Dell W26C Desktop?
If your Dell Desktop experiences a power-rail failure, and the EC ran into a power sequencing failure, replace the system board.
How to fix Management Engine (ME) error on Dell W26C Desktop?
If you encounter a Management Engine (ME) error on your Dell Desktop, and a timeout error is displayed while waiting on ME to reply to HECI message, replace the system board.
Essential safety guidelines, preparation steps, and ESD protection measures before computer servicing.
Steps to follow after completing internal computer maintenance and reassembly.
Lists tools, screws, and provides an overview of major computer components.
Procedures for removing and installing the stand and covers.
Instructions for replacing hard drives, SSDs, and memory modules.
Steps for replacing the system board, processor, and related components.
Procedures for removing and installing the display panel and middle frame.
Guidance on obtaining and installing necessary drivers and software updates for the system.
Instructions on how to access and navigate the BIOS setup utility for system configuration.
Explanation of BIOS settings and procedures for updating the system BIOS.
Instructions for running diagnostic tests, interpreting LED codes, and recovering the system.
Step-by-step guides for updating the system BIOS via USB or Windows.
Information on accessing Dell's online resources and support channels for assistance.
To Next Page
General