Dell Wyse 3030 LT

—Use this option to select the Security Mode. The available options are Warn on View default, the Full security, and No
security.
d If you select the Microsoft, enter the IP address of the Broker Server in the Broker Server box, and then click OK to save the
settings.
e If you select Dell vWorkspace, use the following guidelines:
• Broker Server—Enter the IP address of the Broker Server.
• Select the check box to enable vWorkspace Gateway.
• vWorkspace Gateway—Enter the IP Address of the vWorkspace Gateway.
f If you select Other, you must enter the IP address of the Broker server in the Broker Server box.
3 Click OK to save the settings.
Conguring connections locally on ThinLinux
On the System Settings page, click the Connections icon. The Connections page contains the following tabs:
• Citrix
• VMware
NOTE: The description names for all the connections can not be edited once you create the connection.
Conguring and managing Citrix connections
The Citrix Connections page enables you to create and manage the Citrix connections both locally and globally.
Figure 4. Citrix connection settings
To congure the local Citrix settings:
1 Click the + icon to add a new Citrix Connection.
The Citrix Connections page is displayed.
2 Enter the name of the Citrix connection for which you specify the Server URL address.
3 From the Connection Type drop-down list, select any of the following connection types:
• Server
30
Software