To Next PageTo Next Page
Need help?Do you have a question about the Dell Wyse 3030 and is the answer not in the manual?
General| L2 cache | 1 MB |
|---|---|
| Processor cores | 2 |
| Processor model | N2807 |
| Processor family | Intel® Celeron® |
| Processor frequency | 1.58 GHz |
| Processor boost frequency | 2.16 GHz |
| Storage media | Flash |
| Card reader integrated | - |
| Total storage capacity | 4 GB |
| Product color | Black |
| Power supply | 30 W |
| AC input voltage | 100-240 V |
| AC input frequency | 50 - 60 Hz |
| Internal memory | 2 GB |
| Memory clock speed | 1333 MHz |
| Internal memory type | DDR3-SDRAM |
| Maximum resolution | 1920 x 1200 pixels |
| Wi-Fi | No |
| Cabling technology | 10/100/1000Base-T(X) |
| Storage temperature (T-T) | -10 - 60 °C |
| Operating temperature (T-T) | 10 - 40 °C |
| Storage relative humidity (H-H) | 10 - 95 % |
| Operating relative humidity (H-H) | 20 - 80 % |
| USB 2.0 ports quantity | 3 |
| Ethernet LAN (RJ-45) ports | 1 |
| VGA (D-Sub) ports quantity | 0 |
| Sustainability certificates | RoHS |
| Operating system installed | Wyse ThinOS |
Weight and Dimensions| Depth | 117 mm |
|---|---|
| Width | 29 mm |
| Height | 197.5 mm |
| Weight | 2340 g |
Instructions for installing the vertical stand for the Dell Wyse Cloud Client.
Instructions for installing the VESA mount for the Dell Wyse Cloud Client.
Connecting the keyboard and mouse using a USB connector.
Connecting the network cable to the client device.
Connecting the wireless antenna to the client device.
Connecting the Fiber SFP module to the client device.
Connecting the display using a DVI-I connector.
Connecting the display using a DVI-D connector.
Connecting the display using a VGA adapter.
Connecting the power cable to the client device.
Connecting the power cable to the display.
