Why is my Dell Server display distorted?
A distorted display on your Dell Server can be caused by several factors. The monitor or dongle (if used) might be incompatible. Another reason could be a display mode that is not supported. Check for bad connections on the display output, or a defect in the logic board.
Why do both LEDs stay on when I power on my Dell Server?
If both LEDs on your Dell Server stay on when you first apply power, it could indicate a logic board defect, BIOS malfunctioning, or an abnormal power source.
How to fix a Dell Wyse 3030 LT Server when no LED lights up on first power apply?
If no LED lights up briefly when you first apply power to your Dell Server, check the AC power source and call your utility company if necessary. Also, ensure the AC power cord is properly plugged in and the DC plug is connected to the unit.
Provides hardware specifications and OS specific configurations.
Links to support and self-service sites for Dell Wyse Thin Clients.
Information on hardware installation for the thin client.
How to enter BIOS settings for ThinOS and ThinLinux.
Describes user interface and connection options after logging on to ThinOS.
Details logging on to the thinuser account and admin mode on ThinLinux.
Information about multiple monitor configurations for ThinOS and ThinLinux.
Steps to configure dual head display settings on ThinOS.
Options for configuring network settings on ThinOS.
Steps to configure general network settings via Network Setup.
Steps to configure DHCP options settings in Network Setup.
Steps to configure Ethernet (ENET) network settings.
Steps to configure Wireless LAN (WLAN) network settings.
Steps to configure wired network connection settings.
Details supported wired audio options like combo jack and headphones.
Details supported Bluetooth audio options like M.2 card and USB interface.
Describes accessing Peripherals settings in ThinLinux.
Lists tested keyboard models and their types.
Lists tested mouse models and their types.
Lists tested webcam and printer models and their types.
How to select shutdown options in ThinOS.
How to set monitor sleep mode in ThinLinux.
Steps to configure virtual broker connections on ThinOS.
Steps to create and manage Citrix connections locally.
Steps to create and manage VMware View client connections.
Steps to configure WDM and CCM settings for WDA on ThinOS.
Details WDA settings for ThinLinux, focusing on CCM.
Details registering the thin client to a CCM server via Wyse Device Agent.
Details system features like CPU, OS, Memory, Networking, Display, Audio, etc.
Lists power LED status, causes, and troubleshooting steps.
To Next Page
General
