Base
1 Power button with optional ngerprint reader
Press to turn on the computer if it is turned o, in sleep state, or in hibernate state.
When the computer is turned on, press the power button to put the computer into sleep state; press and hold the power button for
10 seconds to force shut-down the computer.
If the power button has a ngerprint reader, place your nger on the power button to log in.
NOTE
: Before using the ngerprint reader, congure it in Windows to recognize your ngerprint as a passcode and enable
access. For more information, see www.dell.com/support/windows.
NOTE: You can customize power-button behavior in Windows. For more information, see
Me and My Dell
at www.dell.com/
support/manuals.
NOTE: The power-status light on the power button is available only on computers without the optional ngerprint reader.
Computers shipped with the ngerprint reader integrated on the power button will not have the power-status light on the
power button.
2 Right-click area
Press to right-click.
3 Touchpad
Move your nger on the touchpad to move the mouse pointer. Tap to left-click and two nger tap to right-click.
4 Left-click area
Press to left-click.
Views
9
To Next Page
Loading...
