Replacing the Computer Stand 15
3
Replacing the Computer Stand
WARNING: Your computer is heavy and can be difficult to maneuver. Seek
assistance before attempting to lift, move, or tilt the computer and always lift
correctly to avoid injury; avoid bending over while lifting.
WARNING: The computer stand should be installed at all times to ensure
maximum system stability. Failure to install the stand could result in the computer
tipping over, potentially resulting in bodily injury or damage to the computer.
1
Follow the procedures in "Before You Begin" on page 13.
2
Loosen the captive screw securing the stand to the base of the computer.
3
Gently slide the stand back, towards the rear of the computer, then pull
the stand away from the computer to remove it.
To Next Page
Loading...
