46 Keyboard
3
Slide the keyboard backlight cable into the system-board connector and
press down on the connector latch to secure the cable.
4
Slide the tabs on the keyboard into the slots on the top cover and lower the
keyboard into place.
5
Gently press the top of the keyboard to secure it to the tabs on the top
cover.
6
Replace the palm-rest assembly (see "Replacing the Palm-Rest Assembly"
on page 32).
7
Replace the battery (see "Replacing the Battery" on page 14).
CAUTION: Before turning on the computer, replace all screws and ensure that no
stray screws remain inside the computer. Failure to do so may result in damage to
the computer.
To Next Page
Loading...
