27
delay start the programme
1. Select a wash programme.
2. Press the Delay button repeatedly to set the delay hours for the programme to start (0-24 hr).
3. Press the Start/Pause button to confirm and commence the delay function.
To cancel the delay function:
• before the programme starts, press the Delay button repeatedly until 0 hr
• while the programme is running, press the On/Off button to Off.
adding laundry during wash
You can still add laundry into the unit while it is running a programme. Make sure to follow the
procedures below in order to avoid being scalded by the hot water in the drum.
1. Press the Start/Pause button for 3 seconds.
2. Wait until the
indicator is light up to signify you can add your laundry. For safety, you should
still check if the drum has stopped rotating and if the door is unlocked.
The machine may not unlock the door for adding laundry when there is too much water or
when the temperature is too high in the drum.
3. Open the door carefully, be alert of the hot water in the drum.
4. Add the laundry carefully into the drum and close the door.
5. Press the Start/Pause button to resume the programme.
D8W6D19_IB_2L_RC_190322.indb 27 22/3/2019 4:06 PM
To Next Page
Loading...