30
REPLACING THE OVEN LAMPS
WARNING: Ensure the appliance is switched off before replacing the lamp
to avoid the possibility of electric shock.
■ Let the oven cavity and the heating elements to cool down;
■ Switch off the electrical supply;
■ Remove the protective cover A (fig. 26);
■ Unscrew and replace the bulb B with a new one suitable for high temperatures
(300 °C) having the following specifications:
230-240V 50 Hz, E14 and same
power (check watt power as stamped in the bulb itself) of the replaced
bulb.
■ Refit the protective cover A;
NOTE: Oven bulb replacement is not covered by your guarantee.
Figure 26
B B
A
A
To Next Page
Loading...
