DeLonghi DE609MP - Page 29

25
HOW TO STOP THE PYROLYSIS CYCLE
1. Turn the function selector to 0 (oven OFF)
■ If the oven cavity temperature is higher than
300 °C
1a do•Lo (door locked) appears steadily on the program-
mer display.
1b When the oven cavity temperature drops below
300°C:
• the time appears on the programmer display
again;
• the key pilot light goes out;
• the door unlocks.
■ If the oven cavity temperature is lower than 300 °C
1c The time appears on the programmer display.
1d After a technical time:
• the key pilot light goes out;
• the door unlocks.
ACCIDENTAL INTERRUPTION OF THE
PYROLYSIS CYCLE
2. The function selector has been turned to any co-
oking function
■ If the oven cavity temperature is higher than
300 °C
2a do•Lo (door locked) appears steadily on the program-
mer display.
2b When the oven cavity temperature drops below
300°C:
• P0•00 appears with P ashing;
• the key pilot light goes out;
• the door unlocks.
2c To reset normal conditions turn the function selector
to 0 (oven OFF). The time appears on the program-
mer display.
■ If the oven cavity temperature is lower than 300 °C
2d The time appears on the programmer display, or the
oven cavity temperature (caution: in this case the he-
ating elements are working).
2e After a technical time:
• the key pilot light goes out;
• the door unlocks.
2f To reset normal conditions turn the function selector
to 0 (oven OFF). The time appears on the program-
mer display.
I
I
I
I
I
I
I
I
I I
I
I
I
I
I
I
2a
1a
1b
2b
2c/d
2d