26
WHAT TO DO WHEN THE PYROLYSIS CYCLE HAS FINISHED
1. P0.00 with AUTO ashing.
Wait for the oven to cool down and the door to
unlock.
The pyrolytic cycle has nished. P0.00 will remain
until the door is unlocked.
The door remains locked until the cavity temperature
has dropped below 300 °C.
2. The light with the key symbol goes out (when
the temperature has dropped below 300 °C).
AUTO and the letter P ash.
The door is unlocked and can be opened.
3. Turn the function selector knob to 0 (oven OFF).
The time appears on the programmer display.
4. Wait for the oven to cool down completely.
5. Remove the pulverised dirt.
Open the oven door and remove the residue of pulve-
rised dirt inside the oven with a damp cloth.
Before switching the oven on again in any function
wait for the appliance to cool down completely.
I
I
I
I
I
I
I
I
I
I
I
To Next Page
Loading...
