DeLonghi DEC180E - Selecting Functions; How to Dehumidify; How to Use as a Ventilator; Comfort Function

10
How to dehumidify (dehumidification only function)
1) Plug the appliance into a mains socket.
2) The display shows “- -“ to indicate that the appliance is in standby and therefore ready for
operation. If the message “Ft”is displayed, empty the tank or position it correctly.
3) Press the ON/OFF button.
4) Press the “mode” button and choose the dehumidification function (“
”
indicator light
on). The display shows the relative humidity set point.
5) Press the “+” or “-” button to set the desired humidity (30% means a dry environment, 80%
a humid environment).
6) Press the “power level” button to select the desired dehumidification power level
(MIN/MAX).
7) Press the “ ” button to display, in sequence, the ambient relative humidity (“ ” indicator
light flashing) and the ambient temperature (“ ” indicator light flashing).
8) When the appliance reaches the humidity set point, it will stop and the periodical ventila-
tion function will start, so as to ensure a correct relative humidity reading. As soon as the
humidity increases above the set point, the appliance will automatically resume dehumidi-
fication operation.
How to use as a ventilator
1) Plug the appliance into a mains socket.
2) The display shows “- -“ to indicate that the appliance is in standby and therefore ready for
operation. If the message “Ft” is displayed, empty the tank or position it correctly.
3) Press the ON/OFF button.
4) Press the “mode” button and choose the purification function (“ ” indicator light on). The
display shows “FN”.
5) Press the “ ” button to select the desired heating power level (MIN/MAX).
COMFORT function
This is an automatic dehumidification function. In this mode, on the basis of room temperatu-
re, the appliance establishes the ideal level of well-being and power level to use.The display
shows “
CC tt
”. Neither the humidity nor the power level can be changed.
Selecting the functions