29
PresstheStart/pausebutton(N).Thesettimeisdisplayed.
Ifyouwanttochangethetimelater,repeatthesettingpro-
cedure described above.
Oven function
Inthestand-bystate,theDisplayshowsthesettimeor--:--.
• PresstheOn/stand-bybutton(R).
Theoventurnson.ThisistheFunctionselectingstate.The
DefaultselectedfunctionisBake.Themodiablevalues
ash.
• Rotate the Function selection dial (S) to select the
function wanted.
• Rotate the Temperature/weight dial (Q) to set the
temperature if needed (not required in some pro-
grammes).InthePizzafunctionsetthe weight.Inthe
Cookiesfunctionsetthenumberofsheets.
• Rotatethe Timer dial (M) to set the timer if needed. In
theBothPizzaandCookiesfunctionshaveapresettimer.
- In“Pizza”functionthetimewillchangedependingonthe
selectedweight.
- In“Biskuit”functionitispossibletomodifythecooking
time.
• PresstheStart/pausebutton(N)tostartcooking.
The red ON light (O) turns on.
When the timer expires, the display shows “End” and
emits a acoustic signal (three ‘beeps’). Press the On/
stand-bybutton(R)toresettheoven.
During the cookingprocessyoucan pause theovenby
pressingtheStart/pausebutton(N).
TheredONlight(O)thatislocatedaroundtheedgeofthe
Start/pausebutton(N)startstoblink.
Within5minutes,presstheStart/pausebutton(N)tore-
sumethecookingprogramme,otherwisetheoventurns
o.
Itispossibletointerruptthecookingprocessatanytime
bypressingfor1secondtheON/stand-bybutton(R).The
ovengoesintostand-bycondition.
IntheBakeandConvectionfunctions,theovenemitsa
singlebeepwhenthersttargettemperatureisreached.
During thesefunctions it is possible to view the cavity
temperaturebypressingthecavity temperaturebutton
(P).
The temperature is displayed for 5 seconds.
Display messages
The appliance must be installed indoors in a room without
draughtsandawayfromsourcesofheatanddirectsunlight.
The display indicates any problems with the appliance.
If“ERR”ashesonthedisplay;theappliancehasfailedto
regulatethetemperature.
Notetheerrorcodeonthetimerdisplayandtaketheappli-
ancetoDe’Longhicustomerservices.