USER MANUAL
25
DELIVERING HOT WATER • DELIVERING STEAM
7 DELIVERING HOT WATER
•Wait until the appliance is up to temperature,
then place a glass or cup directly under the
hot water/steam spout (
15).
The orientation of the hot water/steam spout (
15)
can be adjusted to facilitate use with various types
of container (glass, jug, etc).
A. Turn the steam adjustment knob (18) to deliver
hot water. Hot water flows automatically.
•When you have run off the required amount
of water, turn the knob (
18) to off.
While running off hot water, the spout (15) heats
up.
Do not touch to avoid burns.
8. STEAM DELIVERY
Use steam to heat milk or other liquids and to
prepare milk for cappuccino coffee.
A. Press the steam button (36). The temperature
indicator (
28) begins to flash.
B. When the temperature indicator (28) stops
flashing, place an empty container under the
spout and open the steam delivery knob (
18).
Condensate is given off immediately, followed
by genuine steam. Wait until steam is given
off before placing the container with the liquid
to be heated under the spout.
The orientation of the hot water/steam spout (
15)
can be adjusted to facilitate use with various types
of container (glass, jug, etc).
While delivering steam, the spout (15) heats up.
Do not touch to avoid burns.
After use, you are recommended to clean the
cappuccino maker (
16) by rotating clockwise and
pulling downwards.
A
B
8.1 Cooling the appliance after using in steam mode
Two minutes after selecting steam mode, the appliance automatically returns to the “coffee ready” mode
with the temperature indicator (
28) flashing rapidly. You must then wait several minutes before preparing
coffee again. Alternatively, if you need to use the appliance immediately, you can cool it rapidly by running
off hot water as described in paragraph 7 until indicator
28 stops flashing.
GB
To Next Page
Loading...
