Troubleshooting
Problem Possible causes Solution
Thedevicewillnotswitchon Thepowersupplycableisnotinserted
correctly
Checkthatthepowersupplycable
connector is fully inserted in the
appropriatesocketonthebackofthe
device;thencheckthattheplugis
correctly connected to the power outlet
Espressocoeedoesnotowout Nowaterinthetank Fillthewatertank
Theholesinthelter-holderareblocked Cleantheholesinthelter-holderspouts
Theespressoboileroutletisblocked Cleanasindicatedinthe“Cleaningthe
boileroutlet”paragraph(page13)
Espressocoeedripsfromtheedgesof
thelter-holderinsteadofthroughthe
holes
Thelter-holderisnotcorrectlyinserted
or is dirty
Attachthelter-holdercorrectlyand
handle to the right until aligned to the
CLOSEposition
Theespressoboilergaskethaslost
elasticity or it is dirty
Havetheespressoboilergasketreplaced
ataservicecenter
Theholesinthelter-holderspoutare
blocked
Cleantheholesinthelterholderspouts
Thelter-holderdoesnothookontothe
device
Toomuchcoeewaspouredinthelter Usethemeasureprovidedandmakesure
tousethecorrectlterforthetypeof
preparationdesired.
Loudpumpnoise Thewatertankisempty Fillthetank
Thetankisinsertedincorrectlyandthe
valveonthebottomisnotopen
Pressthetanklightlytoopenthevalveon
thebottom
Thecoeecreamisclear(itowsquickly
fromthespout)
Thegroundcoeehasnotbeen
sucientlypressed
Increasepressingofthegroundcoee
Notenoughgroundcoee Increasetheamountofgroundcoee
Thecoeeisnotgroundnelyenough Onlyusecoeegroundspecicallyfor
espressocoeemachines
Incorrecttypeofgroundcoee Changethequalityofthegroundcoee
Aftercoeedelivery,thecoeelterre-
mainsattachedtotheboileroutlet
Insertthelter-holderagain,then
removeit.
Afterthe coee has been prepared,the
podorcoeepowderremainsattachedto
the boiler outlet
Re-insertthelter-holder,delivercoee,
removethelter-holder.