DeLonghi ECAM29081XTB - Test Mode

Doc. Nr.: DSDL_23016_A
[11]
5. TEST MODE
5.1. PROCEDURE TO ACTIVATE TEST MODES
- The appliance must be plugged-in and in stand-by mode.
- Remove the drip tray. The GROUNDS CONTAINER icon will flash
- Hold the combination of the below three button pressed (depending on the model):
ECAM29X.6Y
ECAM29X.8Y
until the GROUNDS CONTAINER icon will turn OFF and the LEDs of the below buttons (depending
on the model) will start flashing:
ECAM29X.6Y
ECAM29X.8Y