12
CONVECTION
Press any button (H L N) or turn any dial (G M O).
The oven turns on. The default selected function is TOAST.
Turn the FUNCTION selection dial (O) to set the CONVECTION
mode.
Turn the TEMPERATURE/PIZZA SIZE/SLICES/TRAY dial (M) to set
the desired temperature. The default temperature is 350 °F.
Turn the TOAST COLOUR/TIME dial (G) to set the desired timer.
The default time is 1:00 (hour).
Press the START/STOP button (H) to start cooking.
The red ON light (I), that is located around the edge of the
START/STOP button (H), turns on.
The oven starts the preheating phase. pre heat message is
shown on display. When the oven reaches the set temperature,
an audible signal will sound. The countdown will start. Place the
food on the wire rack (D) or bake pan (E) and insert in the oven
in position 1 or 2.
Close the door.
At the end of the set time the appliance will play a sound signal
and the display will show END.
To turn the appliance o during running function or reset the
control at end of time when END is showed on display, press the
START/STOP button (H) for 2 seconds. Open the door and remove
the food. Take great care when taking the food out of the oven.
Use oven gloves.
While CONVECTION function is running , it is possible to switch
the function between BAKE and BROIL/GRILL without stop the
cooking process. Just turn the FUNCTION selection dial (O) to se-
lect the desired new function. Timer and set temperature will be
kept between CONVECTION and BAKE. For BROIL/GRILL func-
tion, the timer will be kept and temperature is auto selected.
To Next Page
General
