What to do if my DeLonghi EX Air Conditioner does not operate for about three minutes after restarting it?
If your DeLonghi Air Conditioner doesn't operate for about three minutes after restarting, wait. An internal safety device prevents the appliance from restarting immediately after it was turned off; this delay is normal.
How to fix DeLonghi EX that won't turn on?
If your DeLonghi Air Conditioner doesn't turn on, there might be a few reasons. First, ensure the unit is properly plugged into the outlet. If it is, check if there is a power outage and wait for the current to return. If neither of these are the issue, the internal safety device may have tripped; in this case, call the toll free customer service number.
What to do if my DeLonghi Air Conditioner runs but doesn't cool the room?
If your DeLonghi Air Conditioner is running but not cooling, several factors could be the cause. First, ensure that windows, doors, and drapes are closed, following the unit's usage recommendations. Check for and eliminate any heat sources in the room, such as an oven or hair dryer. Make sure the air exhaust hose is correctly attached to the back of the unit. Also, inspect and clean or replace the dust filters if they are clogged. Finally, consider that the unit's cooling capacity may not be suitable for the room size.
Why does my DeLonghi Air Conditioner not turn on?
If your DeLonghi Air Conditioner isn't turning on, there are a few potential reasons. First, ensure that the unit is properly plugged into a working power outlet. If it is plugged in, check if there is a power outage and wait for the power to be restored. In case the internal protection device has been triggered, you should call the help centre.
Why is my DeLonghi EX Air Conditioner running but not cooling?
There could be several reasons why your DeLonghi Air Conditioner isn't cooling. Check if windows, doors, or drapes are open and close them. Ensure there isn't a heat source like an oven or hair dryer in the room and eliminate it. Make sure the air exhaust hose is correctly attached to the back of the unit. Also, the dust filters might be clogged, so clean or replace them. Finally, consider whether the unit's cooling capacity is suitable for the room size.
How to get rid of unpleasant odor from DeLonghi Air Conditioner?
If you notice an unpleasant odor while your DeLonghi Air Conditioner is running, the dust filters might be clogged. Try cleaning or replacing the filters as described previously.
What to do if my DeLonghi EX works for a short period of time?
If your DeLonghi Air Conditioner operates only briefly, the issue might be related to the air exhaust hose. Ensure the hose is correctly positioned, keeping it as short and straight as possible, and free from obstructions. Also, check for and remove any obstructions that may be impeding air exhaust outside the room.
Why does my DeLonghi Air Conditioner not work for about 3 minutes from restart?
The delay in starting, approximately 3 minutes after a restart, is normal for the DeLonghi Air Conditioner. This delay is due to an internal protective device that safeguards the compressor. Simply wait for the unit to start; this is a standard operation.
Why does my DeLonghi Air Conditioner only work for a short time?
If your DeLonghi Air Conditioner only works for a short period, it might be due to an obstructed or bent air exhaust hose. Make sure to correctly position the air exhaust hose, limiting its length and curves as much as possible, and avoid any obstructions. Another potential cause is an obstruction impeding air exhaust outside; identify and remove any obstacles.
What to do if DeLonghi EX works for a short time only?
If your DeLonghi Air Conditioner only works for a short period, it might be due to obstructions in the air exhaust system. Make sure the air hose is correctly positioned, as short and free of curves as possible, to prevent bottlenecks. Also, check for and remove any obstacles blocking air discharge.
General| Brand | DeLonghi |
|---|---|
| Model | EX Series |
| Category | Air Conditioner |
| Language | English |
Explains important warning symbols used in the manual for user safety.
Guidance on seeking repairs and using authorized service centers for the appliance.
General safety guidelines for the installation, operation, and storage of the air conditioner.
Information on R410A refrigerant gas, including compliance and environmental considerations.
Warnings and safety information for appliances using R290 refrigerant gas.
Specifications including power supply, absorbed power, and operating limits for the appliance.
Instructions for the proper and environmentally sound disposal of the air conditioner.
Guidelines for safe and correct electrical connection of the appliance to the power supply.
Lists and labels the various components and parts of the air conditioner unit.
Lists and labels the different accessories included with the air conditioner.
Steps for installing the exhaust hose when using a sash window.
Steps for installing the exhaust hose when using a double casement window.
Instructions for semi-permanent installation through a wall or window.
Detailed description of control panel buttons, indicators, and their functions.
Instructions for safely powering the air conditioner on and off.
How to use the appliance for cooling and dehumidifying the room.
How to use the appliance specifically for reducing room humidity.
How to use fan-only mode and activate silent operation for reduced noise.
How to change temperature units and program delayed start/shut down.
Exclusive remote functions like REAL FEEL and general recommendations for efficiency.
Identifies remote buttons and provides instructions for battery installation and replacement.
How to use the swing button and power the appliance via the remote control.
Recommendations for optimal performance and efficient room conditions.
Instructions for cleaning the unit exterior and the air filters.
Pre-season checks and end-of-season draining procedures for the appliance.
Explains common error codes displayed on the appliance, such as LE, HL, PF, F1, F2.
Actions to take based on specific error codes displayed by the appliance.
A table detailing common issues, their causes, and recommended solutions.
To Next Page
