What to do if my DeLonghi Heater doesn’t turn on?
If your DeLonghi Heater doesn't turn on, ensure it is properly plugged in. If the auto-start function is active, either wait for the set time to elapse or press the button (E) twice to cancel it, then press button (A). Also, check if the set temperature is higher than the current temperature by using the “+” button to increase it.
What to do if my DeLonghi Heater displays PF and emits a beep?
If your DeLonghi Heater displays "PF" and emits a beep, it indicates that the temperature sensor is not working properly. Please contact Customer Service for assistance.
Why is the display showing "Ht" blinking on my DeLonghi HFX60?
If the display on your DeLonghi Heater shows "Ht" blinking, it indicates that the internal temperature is too high. Ensure the heater is correctly positioned, respecting the minimum distances from walls or objects as indicated in the instruction manual. Remove any obstructions around the heater. Disconnect the plug from the outlet and allow the appliance to cool down. After a few minutes, plug the appliance in again.
Why is a green dot flashing and the unit is off on my DeLonghi Heater?
If a green dot is flashing and your DeLonghi Heater unit is off, it could mean the tip-over switch has been activated. Ensure the appliance is standing upright on a flat surface.
Crucial safety advice covering electrical hazards, proper placement, and cable integrity.
Highlights risks of burns from hot surfaces, especially for children and vulnerable people.
Details the appliance's safety device that prevents overheating by shutting it off.
Instructions for safe battery handling and proper disposal of the appliance.
Identification and description of key parts like buttons, display, and filter.
Steps for setting up the heater, including placement and power connection.
Detailed guide on using Ventilation, Anti-freeze, Heating modes, ECO PLUS, Oscillation, and Timer.
Instructions for cleaning the appliance, air grilles, and the dust filter.
Guide to identifying and resolving common issues like the product not turning on or unexpected shut-off.
To Next Page
General