What to do if my DeLonghi HFX65 doesn’t turn on?
If your DeLonghi Heater doesn’t turn on, first ensure it is properly plugged in. If it still doesn't turn on, wait until the timer has elapsed or press the button (E) twice to cancel the auto-start, then push the button (A). You may also need to use the “+” button to increase the set temperature.
Why does my DeLonghi HFX65 display 'Ht' blinking?
The 'Ht' blinking on your DeLonghi Heater indicates that the internal temperature is too high, possibly due to an obstruction of the air intake or outlet grille, or incorrect positioning. Check that the appliance is correctly positioned, respecting the minimum distances from walls or objects as indicated in the instruction manual. Remove any obstructions. Disconnect the plug from the outlet and let the appliance cool down. After a few minutes, plug the appliance in again.
What to do if a green dot is flashing and my DeLonghi HFX65 is off?
If a green dot is flashing and your DeLonghi Heater is off, it indicates that the tip-over switch has been activated. Make sure the appliance is standing upright on a flat surface.
Identifies the product as the HFX65 Series Ceramic Fan Heater and provides usage instructions.
Electrical safety, placement near water, and power cable integrity advice.
Safe usage rules for children and individuals with reduced physical or mental capabilities.
Precautions regarding hot surfaces and preventing burns, especially for vulnerable users.
Measures to prevent fire and overheating, including clearances from flammable materials.
Explanation of the automatic shut-off feature activated by tipping.
Guidance on surface, position, damage, extension cords, and room size.
Safety rules for handling, replacing, and disposing of batteries.
Instructions for responsible disposal of the appliance as electronic waste.
Description of control panel buttons, indicator lights, and other parts.
Steps for setting up and connecting the appliance to the mains power.
Covers Ventilation, Anti-freeze, Heating 1/2, ECO PLUS, and Oscillation functions.
Guide to using the timer and remote control for heater operation.
Procedure for replacing batteries in the remote control.
Guidance on cleaning air intake/outlet grilles and the dust filter.
Overview of supply voltage and absorbed power.
Solutions for when the product does not turn on or has startup issues.
Troubleshooting unexpected power offs and display errors like 'Ht'.
General| Type | Fan Heater |
|---|---|
| Power | 2000 W |
| Safety thermostat | Yes |
| Anti-frost function | Yes |
| Wheels | No |
To Next Page
