To Next PageTo Next PageWhat to do if my DeLonghi Heater doesn't work?
If your DeLonghi Heater isn't working, first, ensure the temperature isn't set too low by setting it to a higher position. Next, verify that the heater is properly plugged into a working electrical outlet. Finally, check if the Key lock is activated.
Why does my DeLonghi HSX4315E display "Ht" blinking?
If the display of your DeLonghi Heater shows "Ht" blinking, it indicates that the internal temperature is too high. Remove the plug from the mains. Also, make sure the appliance isn't covered or obstructed; if it is, remove the obstructions. Ensure the appliance is correctly positioned, respecting the minimum distance from walls or objects as indicated in the instruction manual. Let the appliance cool down, then plug it in again. If the issue persists, contact DeLonghi's toll-free number.
What to do if the display of my DeLonghi HSX4315E Heater shows a blinking dot and I hear a beep?
If the display shows a blinking dot and you hear a beep, it means the appliance could be tipped over or is positioned improperly. Make sure the DeLonghi Heater is standing upright on a flat surface and position it correctly.
What to do if my DeLonghi HSX4315E Heater display shows "PF"?
If your DeLonghi Heater display shows "PF", it indicates that the temperature sensor is malfunctioning. Contact the DeLonghi toll-free number for assistance.
General| Type | Oil-filled radiator |
|---|---|
| Power | 1500 W |
| Thermostat | Yes |
| Safety Features | Overheat protection |
| Anti-frost function | Yes |
| Number of fins | 7 |
| Carry handle | Yes |
| Pre-assembled castors | Yes |
| Heat Settings | 3 |
| Tip-Over Switch | Yes |
Minimum clearance required around the heater to prevent fire hazards.
Essential safety precautions related to electrical hazards and proper usage.
Guidelines for safe operation, supervision, and power connection.
Precautions to prevent burns from hot surfaces and fire hazards from nearby materials.
Solutions for common problems like the appliance not working or displaying error codes.
