To Next PageTo Next PageWhat to do if my DeLonghi HFX60V20 Heater doesn’t turn on?
If your DeLonghi Heater doesn’t turn on, first ensure it is properly plugged in. If it still doesn't turn on, wait until the timer has elapsed or press the button (E) twice to cancel the auto-start, then push the button (A). You may also need to use the “+” button to increase the set temperature.
What to do if a green dot is flashing and my DeLonghi HFX60V20 Heater is off?
If a green dot is flashing and your DeLonghi Heater is off, it indicates that the tip-over switch has been activated. Make sure the appliance is standing upright on a flat surface.
Why does my DeLonghi Heater display 'Ht' blinking?
The 'Ht' blinking on your DeLonghi Heater indicates that the internal temperature is too high, possibly due to an obstruction of the air intake or outlet grille, or incorrect positioning. Check that the appliance is correctly positioned, respecting the minimum distances from walls or objects as indicated in the instruction manual. Remove any obstructions. Disconnect the plug from the outlet and let the appliance cool down. After a few minutes, plug the appliance in again.
General| Type | Fan electric space heater |
|---|---|
| Certification | CE |
| Remotely operated | Yes |
| Heating element type | Ceramic |
| Number of power levels | 2 |
| Timer duration (maximum) | 24 h |
| Display | LED |
| Control type | Buttons |
| Product color | Black, White |
| Placement options | Desk, Table, Wall |
| Heating power | 2000 W |
| Heating power (min) | 1100 W |
| Suitable for room volume up to | 60 m³ |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 Hz |
Weight and Dimensions| Depth | 181.5 mm |
|---|---|
| Width | 232 mm |
| Height | 351 mm |
