To Next PageTo Next Page
Need help?Do you have a question about the DeLonghi Intensa ECAM 23.210 and is the answer not in the manual?
General| Product type | Espresso machine |
|---|---|
| Built-in grinder | Yes |
| Capacity in cups | 14 cups |
| Milk adding type | Manual |
| Number of spouts | 2 |
| Coffee input type | Coffee beans, Ground coffee |
| Coffee maker type | Fully-auto |
| Appliance placement | Countertop |
| Water tank capacity | 1.8 L |
| Coffee beans capacity | 150 g |
| Maximum operating pressure | 15 bar |
| Number of grinder settings | 13 |
| Reservoir for brewed coffee | Cup |
| AC input voltage | 220–240 V |
| AC input frequency | 50 - 60 Hz |
| Control type | Buttons |
| Product color | Black |
| Built-in display | No |
Weight and Dimensions| Depth | 430 mm |
|---|---|
| Width | 238 mm |
| Height | 338 mm |
| Weight | 9000 g |
Provides voltage, frequency, and maximum input power for the coffee machine.
Details temperature probe, thermal fuse, heater power, and pump specifications.
Schematic of the machine's electrical layout, including components and connections.
Illustrates the flow of water through the machine's components.
Details the placement and function of various microswitches and reed switches.
Steps for initial access, removing panels and containers.
Detailed instructions for safely removing the coffee machine's control panel.
Procedure for detaching the coffee grinder and flowmeter from the unit.
Steps to remove the water pump and the main power board.
Instructions for removing the motor and the tap steam/hot water assembly.
Procedure for detaching the boiler and the infuser kit.
Steps to remove the transmission kit and the coffee spout.
Instructions for removing and aligning the valve assembly.
Procedure to manually check specific machine devices via button combinations.
Procedure to test the display functionality by interacting with icons and controls.
